SILENT KNIGHT 4821 Manual de usuario descargar pdf (Pagina 2)

4815 Smart Sensor

Controller Zone Expander

Connects to the S-Bus on the 4821

control and allows expansion of the

4821 up to 400 zones. The 4815 can

be mounted in the snap track in the

4821 cabinet or remotely mounted in

a plastic utility enclosure. Each 4815

has two serial loops, each capable of

supporting up to 64 SmartSensor

devices for a total of 128 points. Up

to three 4815 controllers may be

used with the 4821. SmartSensors

point ID modules allow connection to,

and point identification of, most

security devices. SmartSensors can

also monitor

non-security contact type devices as

well. SmartSensor addresses are

programmed on-site through a

system touchpad. Point

characteristics are defined by

program options set in the 4821. The

two serial loops are

electronically protected against

shorting and if one loop is shorted,

the other continues to operate

normally. Removing the short

restores loop

functioning automatically.

Dimensions:

048150 4.0" H x 5.25" W (board only)

4815 6.0" W x 7.875" H x 1.5" D

(plastic enclosure)

Shipping Weight:

8 oz.

Power requirements:

11 to 14VDC at 80mA

(provided by 4821)

Loop wiring distance:

3,000 feet using 22 gauge wire

5,000 feet using 18 gauge wire

4111P SmartSensor Devices

Connect to serial loops on the 4815

SmartSensor controller module. Up to

64 devices may be connected on

each loop for a total of 128 points per

4815. SmartSensor point ID modules

are addressed on-site using a system

touchpad. SmartSensors are

available as a stand alone device for

connection to any contact type

sensor.

4824 Serial/Parallel Module

Connects to the S-Bus on the 4821

control and provides both an RS-232

serial port and a Centronics parallel

port. Up to eight 4824 modules may

be connected to a 4821 system

allowing for separate printers in each

partition. The 4824 may be located

anywhere along the S-Bus which

allows printers to be conveniently

located. Reports may be filtered to

print only the data required for a

particular partition. Printed

information may also be filtered by

event type as required. The 4824

allows connection of a portable

computer, on-site, for programming

the system. Connecting an external

modem and phone line to the 4824

allows remote up/downloading to take

place at up to 19,200 bps.

Dimensions:

6.0" W x 7.875" H x 1.5" D

(plastic enclosure)

Shipping weight:

3 lbs.

Power requirements:

11 to 14VDC at 20mA

(supplied by 4821)

Accessories:

Parallel printer (not supplied by

Silent Knight), external modem

(not supplied by Silent Knight).

Security System Features

16 programmable zones,

expandable to 400.

Two types of zone expansion,

hardwire or multiplex point.

Zone expanders may be remotely

located from control.

Up to 6 zone expanders may be

used per system.

1,800 users, codes and cards.

8 true partitions, with up to 8

areas per partition.

High speed 4-wire supervised

serial bus for connection of

touchpads, zone expanders, and

other accessories.

Highly ef ficient switching type 2.5

amp power supply.

Up to 24 touchpads or readers

total may be used per system.

Non-volatile flash memory.

500 event memory.

Four unique sounding patterns.

64 separate exit delays, one for

each area. Entry delay by zone.

Two separately controllable

interiors per area.

Code 2 feature (temporary code).

Duress feature.

Time window programming for

restricted use.

Automatic daylight savings

adjustment.

Service reminder.

Programmable I/O for use with

output modules.

Output modules provide up to 60

voltage/relay outputs.

Built-in line fault monitor .

Program on-site or remotely over

telephone line.

Reports in SIA and Contact ID

formats.

Listings & Approvals:

UL Residential Household Burglary

and Fire (UL985, UL1023) NFPA 72,

Chapter 2

UL Commercial Grade A Local

Mercantile, Grade B & C Central

Station Reporting (UL365, UL609,

UL1610, UL1635)

California State Fire Marshal

Residential Fire (7167-559:124)

Model 4821 Integrated Access

Control and Security Accessories

integrated access control and security system

1 2 3 4

Comentarios a estos manuales

Sin comentarios

SILENT KNIGHT 4821 Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad SILENT KNIGHT 4821