SILENT KNIGHT 4720 Manual de usuario descargar pdf (Pagina 23)

Model 4720 Commercial Security System

Page 20 User's Manual

Testing Your 4000 Security System

IMPORTANT

Weekly tests are recommended to ensure

proper system operation.

Discuss testing with your security company installer to develop the optimum

schedule and procedures that will be right for your system and operation.

Testing is required for UL Fire (NFPA 72 Central Station Regulations) and

is described below. This test must be performed with AC power

disconnected. The purpose of this procedure is to ensure that battery

malfunctions will be discovered during the test.

Disconnect the AC power transformer by unscrewing the mounting screws

that hold the cover in place. Thereafter, AC power is disconnected from the

unit by removing the transformer from the wall receptacle.

Once the test has been completed, reconnect AC power by plugging the

transformer into its receptacle. Then replace the transformer cover and

mounting screws.

Note: While the system transformer is unplugged, the LCD display may

read TROUBLE - AC. Press MUTE MUTE to silence.

To test overall system operation:

1. Call and warn your security company's central station that you plan to

run a system test.

2. Be sure the system is disarmed.

3. Press the TEST button followed by your access code.

If all systems are operating properly, the touchpad will reset momentarily,

your alarm will sound for a few seconds, and a dialer test will be transmitted

to the central station. There are a variety of central station response

procedures. Your security company will inform you as to what response

you should expect from a test.

Note: The system test will not test the sensors and detection devices that

activate alarms. Be sure to test smoke and other fire detectors

regularly, following the procedures provided by the detector

manufacturers. Regular tests ensure they are operating properly.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Sin comentarios

SILENT KNIGHT 4720 Manual de usuario Pagina 23