SILENT KNIGHT 4720 Manual de usuario descargar pdf (Pagina 9)

Model 4720 Commercial Security System

Page 6 User's Manual

System Status Lights

The lights on the top left of the touchpad provide information about your

system, including features that have been enabled or disabled. The table

below describes the LED (light-emitting diodes) functions of the 4660B/C

touchpads.

On Off

The system is disarmed and all

enabled zones are ready to be

armed.

(Zones that are disabled have

either been bypassed, or they are

interior zones that have been

turned off.)

System Disarmed. Indicates

zones in a Not Ready condition

(a sensored door or window may

be open). Not Ready zones can

be viewed by pressing STAT .

System Armed. The system is in

operating condition.

Flashing. The system is

reporting to the central station.

The system is armed. The system is disarmed.

Used in residential installations only.

Usually used in residential installations only.

All zones will be armed when the

ARMED light is ON.

Interior zones are disabled.

When the system is armed, it

protects the building against

entry from the outside, but people

can move around inside without

setting off an alarm.

The CHIME feature is enabled.

When the panel is disarmed and

someone enters the protected area

via a zone programmed as a chime

zone, a chime tone will sound.

The CHIME feature is disabled.

NO chime tone will sound when

someone enters the protected

area.

Note: The CHIME and INTERIOR LEDs are both toggled with

either the CHM or INT buttons.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Comentarios a estos manuales

Sin comentarios

SILENT KNIGHT 4720 Manual de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad SILENT KNIGHT 4720