SILENT KNIGHT 5700 Especificaciones descargar pdf (Pagina 95)

Programming

151295 7-3

7.2.1.2 Module, Wiring Class

8. Choose the class of wiring you wish to use for this module by pressing the or arrow,

then press .

7.2.2 Adding a Module

You must be in the Main Menu to perform this task. If necessary, enter the Installer Code. If

you need to add a new hardware module to the system, follow the steps below.

1. Press or to display the main menu.

2. Enter the installer code if requested.

3. Select for Program Menu.

Display reads: Initializing

Please wait . . .

4. Press to enter module menu.

5. Press to add a module.

6. From the next screen, select the number that corresponds to the type of module you are

adding from the <New Module Type> screen.

The screen will display “Adding module [#]...” for a few moments. You will be returned to

the <New Module Type> screen where you can select another module if desired.

Save changes when you exit the Program Menu or the new module will not be added.

Note: If you add a module that has not been physically connected, the panel will go into trouble after it reinitial-

izes (when you exit the Program Menu). When the new module is attached, the trouble will correct itself

automatically the next time you power up the system.

7.2.3 Deleting a Module

If you ever need to delete a module, follow these steps.

You must be in the Main Menu to perform this task. If necessary, enter the Installer Code.

1. Press or to display the main menu.

2. Enter the installer code if requested.

3. Select for Program Menu.

Display reads: Initializing

Please wait . . .

4. Press to enter module menu.

5. Press to delete a module. A warning screen will display.

6. If you want to proceed with deleting the module, select Yes. To cancel, select No.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 185 186

Sin comentarios

SILENT KNIGHT 5700 Especificaciones Pagina 95