SILENT KNIGHT 5084 Manual de instalación descargar pdf (Pagina 32)

Installation Instructions

151174 3-21

3.6 Model 5076 Heater Kit

The Model 5076 Heater Kit can be used with the Model 5083/5084 Control Panel. It is

designed to maintain the temperature inside the cabinet above 32° F when the outside

temperature is -20° F. The heater uses a self-regulating positive temperature coefficient (PTC)

material for the heating element.

The heater is powered by a 16.5 VAC, 50VA Class II transformer. The heater bracket is

electrically insulated from the heater element.

3.6.1 To Install the 5076 Heater

1. Remove the four #6 nuts that retain the keypad circuit board. (See Figure 3-17.)

Figure 3-17 Keypad Circuit Board Retaining Nuts

2. Replace them with the threaded stand-offs.

3. Mount the 5076 on the threaded stand-offs with the #6 nuts and lock-washer provided.

(See Figure 3-18.)

4. Connect the 16.5 VAC Class II transformer to the two terminals on the 5076 Heater. (See

Figure 3-18.)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 57 58

Sin comentarios

SILENT KNIGHT 5084 Manual de instalación Pagina 32