SILENT KNIGHT 5084 Manual de instalación descargar pdf (Pagina 50)

151174 6-1

Section 6

User Operation

6.1 Visitor Operation

1. Visitors locate the user number next to the name of the tenant/resident they wish to visit.

2. When “Enter Apt. #” (see Section 4.2.1 step 26 to change display message) is indicated by

the LCD display, they enter the number on the keypad.

The tenant is automatically dialed. After the visitor has spoken with the tenant, the tenant

can remotely activate the doorstrike by pressing or dialing a 6 on his or her phone. The

tenant may also hang up the 5083/84, before entering 6, by pressing or dialing #.

If the tenant has not pressed a valid key, the user must press # to hang up the phone.

6.2 Tenant Access Operation

The tenant can operate the doorstrike directly from the keypad in the lobby without using a

building door key by:

Pushing #, then entering their user access code. The user access code is programmed by the

caretaker or installer.

If the code entered is valid the doorstrike will open. the display will show:

DOOR IS OPEN

XX:XX PM (Where XX:XX is the system time.)

If the access code is invalid an INVALID CODE will be displayed. If there are four

consecutive errors the ALARM output will activate for programmed Aux Time to discourage

tampering.

**Important Notice**

Due to wide variations in telephone company exchange switching equipment, Silent Knight can no longer

guarantee that the 5000 Series Apartment Entry System will function properly when used to decode the digit

“6” from rotary (dial type) telephones. For those exchanges where rotary phones will not work, each

apartment must have a Touch-Tone

telephone.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56 57 58

Sin comentarios

SILENT KNIGHT 5084 Manual de instalación Pagina 50