SILENT KNIGHT 5084 Manual de instalación descargar pdf (Pagina 39)

Series 5000 Entry System Installation/Operation Manual

4-6 151174

4.2.2 Operation Mode 1

User Information

Operation Mode 1 is used to program the User Information. Operation Mode 1 can be used

to add, edit or delete user information.

To program user information:

1. Press * then 1. The display showsACCESS #

2. Enter the 6-digit access code. (Factory default is 123456.)

The display shows USER OPTIONS

USER #

At this point you can choose to Add Edit or Delete a user. To Add a user, refer to Section

4.2.2.1. To Edit a user, refer to Section 4.2.2.2. To Delete a user refer to Section 4.2.2.3.

4.2.2.1 Add User Information

To add a user:

1. Do steps 1 through 2 of Section 4.2.2.

2. Enter the new user number. This the number that appears next to the user’s name on the

directory. The user number can be 1 to 8 digits in length and is set in system options (see

section 4.2.1 step 18 for step-by-step instructions for User # Length).

3. Press *. The display shows USER PHONE

4. Enter the users phone number. Up to 20 digits in length.

5. Press *. The display will show USER CODE

111111 (111111 is the default user code)

The user code is the code the user will enter into the system to gain keyless entry. The user

must press # and then their user code to gain keyless entry.

6. Enter the user code number. The user code must be 4 to 6 digits in length.

7. Press *. The display shows DIAL PBX

YES or NO

If the system needs to dial the programmed PBX access number (see 4.2.1 for information

about PBX access number) before dialing this users phone number then set this option to

YES.

8. Press any key to toggle between Yes or No.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 57 58

Sin comentarios

SILENT KNIGHT 5084 Manual de instalación Pagina 39